WELDING CHALLENGE
In summer maintenance work mainly involves repairing the utility shafts supplying power and water to the snowmakers, some of which are on terrain impossible to reach by car. As the power supply to the snowmaking systems is switched off during summer, in the past carrying out any welding operations was a large-scale operation for staff. A 200 kg 6 kV generator had to be carried to the relevant shaft and then taken away again, which required up to four people at a time.
“Thanks to the compact nature of AccuPocket, not to mention the lack of any power cables, I’m able to save at least 30 minutes on every job.” Daniel Seyer, welding engineer
SOLUTION
Bergbahn AG has been using the AccuPocket battery-powered MMA welding system from Fronius since May 2014. This solution boasts a high-powered battery and is specially designed for mobile applications. The battery capacity delivers sufficient power to weld up to eleven 2.5 mm electrodes or eight 3.25 mm electrodes. Weighing a mere eleven kilograms, it can easily be transported to wherever it is needed. A complete charging cycle using the supplied AccuCharger lasts just half an hour. For larger scale welding tasks, the AccuPocket can also be hooked up to a compact 2 kV generator.